Sale!

PU V SEAL | PU HYDRAULIC SEAL | PU PISTON SEAL | PU ROD SEAL | CYLINDER SEAL | POLYURETHANE SEAL | PU V SEAL | PU U SEAL

₹79.00 – ₹136.00

(3 customer reviews)

Add to WishlistAlready In Wishlist
Add to Wishlist
Category: SKU: N/A

Description

Product Description: PU Rod Seal

PU ROD SEAL

ABOUT POLYURETHANE (PU) ROD SEAL

The reciprocating rod seal is one of the most critical elements in hydraulic equipment. Rod seals for hydraulic cylinders seal the system pressure on the rod side of the cylinder against the atmosphere.

The seals need to withstand high pressures during the stroke phase as well as the position holding operation of the cylinder. Rod seal or Gland seals as they are often called exist in a wide variety of different types.

When choosing a rod seal, it is important to define the area of application and the seals need to be chosen as per their specification and design requirement. The individual profile design show specific behaviors and performance which need to be in line with the application´s requirements. There are single or composite designs of rod sealing systems. A leaking rod seal can cause accidents, operational problem as well as environmental pollution. In addition to normal wear and ageing, this seal is directly affected by irregularities on the rod surface.

ROD SEAL

HOW TO MEASURE POLYURETHANE (PU) ROD SEAL

 

  • Pu rod seals have three dimensions to be measured

 

 

  1. ID (Inner Diameter)
  2. OD (Outer Diameter)
  3. Thickness (Height)

 

 

  • However, we can find the size of the pu rod seal on the back side of the used old rod seal.
  • Sometimes we get old damaged PU rod seals in such a case we have to use a vernier caliper
  • Always measure from the back side of pu rod seal

 

CYLINDER1

PRODUCT SPECIFICATION

ADVANTAGE OF PU ROD SEAL
  • Particularly strong wear resistance.
  • Insensitivity to shock loads and pressure peaks.
  • High crush resistance.
  • It has an ideal sealing effect under no load and low-temperature conditions.

 

  • Suitable for demanding working conditions.
  • Easy to install.

 

TYPE OF PU ROD SEAL

The UNS/UHS/UN PU Rod Seal has a wide cross-section and is an asymmetrical U-shaped sealing ring with the same height of the inner and outer lips. It is easy to fit into a monolithic structure. Due to the wide cross-section, the UNS PU Rod Seal is generally used in a hydraulic cylinder with low pressure.

PU ROD SEAL USES

Rod seals for hydraulic cylinders seal the system pressure on the rod side of the cylinder against the atmosphere. The seals need to withstand high pressures during the stroke phase as well as the position-holding operation of the cylinder.

MECHANICAL PROPERTIES

  • Temperature Range – (-35~+100℃)
  • Maximum Pressure – ≤40MPA
  • Maximum Speed – ≤0.5m/s

PU Rod Seal: Durable and Reliable Hydraulic Seal

PU rod seals are a type of hydraulic seal that is made of polyurethane. Polyurethane is a durable and resistant material that can withstand a wide range of temperatures and pressures. PU rod seals are also resistant to wear and tear, making them a reliable choice for hydraulic applications.

If you are looking for a durable and reliable hydraulic seal, then a PU rod seal is a good option. PU rod seals are available in a variety of sizes and shapes to fit your specific needs. They are also easy to install and maintain.

Buy PU Rod Seals Online: High-Quality and Affordable Hydraulic Seals

Looking for high-quality and affordable PU rod seals? Look no further than our online store! We offer a wide selection of PU rod seals to fit your specific needs. Our seals are made from high-quality materials and are backed by our satisfaction guarantee.

Order your PU rod seals today and experience the difference!

  • PU Rod Seals: Durable, Reliable, and Affordable Hydraulic Seals

These PU rod seals are made of high-quality polyurethane, making them durable and resistant to wear and tear. They are also available in a variety of sizes and shapes to fit your specific needs. Plus, they are backed by our satisfaction guarantee, so you can be sure you’re getting a quality product.

  • Shop PU Rod Seals for Your Hydraulic Applications

Looking for PU rod seals for your hydraulic applications? We have a wide selection of high-quality seals to choose from, all at affordable prices. Our seals are made from durable polyurethane and are available in a variety of sizes and shapes. Plus, we offer a satisfaction guarantee on all of our products.

  • PU Rod Seals: The Best Choice for Your Hydraulic Needs

If you’re looking for the best PU rod seals for your hydraulic needs, look no further. Our seals are made from high-quality materials and are backed by our satisfaction guarantee. We offer a variety of sizes and shapes to choose from, so you can find the perfect seal for your application.

  • PU Rod Seals: Easy to Install and Maintain

Our PU rod seals are easy to install and maintain, so you can get back to work quickly. We also offer a variety of installation and maintenance tips to help you get the most out of your seals.

  • PU Rod Seals: The Best Value for Your Money

Our PU rod seals are the best value for your money. We offer competitive prices on all of our products, and we also offer discounts for bulk orders. Plus, we offer a satisfaction guarantee on all of our products.

FAQs for PU Rod seal

1. What are PU rod seals?

PU rod seals are a type of hydraulic seal made of polyurethane. Polyurethane is a durable and resistant material that can withstand various temperatures and pressures. PU rod seals are commonly used in hydraulic applications due to their durability and wear resistance.

2. What are the benefits of using PU rod seals from Bright Rubber?

Using PU rod seals from Bright Rubber offers several advantages:

  • Durability: PU rod seals are made from a durable material that can withstand a wide range of temperatures and pressures.
  • Resistance to Wear and Tear: They are highly resistant to wear and tear, making them suitable for long-term use.
  • Variety of Sizes and Shapes: Bright Rubber offers PU rod seals in a variety of sizes and shapes to suit specific applications.
  • Ease of Installation and Maintenance: PU rod seals from Bright Rubber are easy to install and maintain, ensuring minimal downtime.
  • Satisfaction Guarantee: Bright Rubber provides a satisfaction guarantee on their products, ensuring customer confidence.

3. How do I choose the right PU rod seal for my application?

Selecting the appropriate PU rod seal involves considering the following factors:

  • Seal size and shape
  • Operating temperature and pressure
  • Type of fluid in use
  • Environmental conditions at the application site

Consulting with Bright Rubber or an engineer can help you make an informed choice.

4. Where can I buy PU rod seals from Bright Rubber?

You can purchase PU rod seals from Bright Rubber via their website or by contacting their customer service team directly.

5. How do I install a PU rod seal from Bright Rubber?

While the installation process may vary depending on the specific seal, the general steps are:

  • Clean the installation area thoroughly.
  • Apply a thin coat of lubricant to the seal.
  • Position the seal correctly.
  • Secure the seal in place according to the manufacturer’s instructions.

6. How do I maintain a PU rod seal from Bright Rubber?

Proper maintenance of PU rod seals includes:

  • Regular inspections for wear and tear.
  • Immediate replacement if the seal is damaged.
  • Keeping the seals clean and free of debris.
  • Routine lubrication.
  • Periodic inspection for leaks.

7. What is the difference between PU rod seals and other types of hydraulic seals?

PU rod seals are distinguished by being made of polyurethane, a material known for its durability and resistance. Other hydraulic seals may use less robust materials like rubber or plastic.

8. What are the different types of PU rod seals?

There are various types of PU rod seals designed for specific applications, including:

  • Static seals for stationary parts.
  • Dynamic seals for moving parts.
  • Pressure seals for high-pressure environments.
  • Temperature seals for high-temperature conditions.
  • Chemical seals for use with chemicals.

9. What are the advantages of using PU rod seals?

The advantages of using PU rod seals from Bright Rubber include:

  • Durability and resistance to wear and tear.
  • A wide range of available sizes and shapes.
  • Ease of installation and maintenance.
  • A satisfaction guarantee on products.

10. How can I contact Bright Rubber for more information about PU rod seals?

You can reach Bright Rubber through email at bright_rubber@yahoo.co.in or by calling the following mobile numbers: +91 9173841576 and +91 9662313494.

11. What are the factors to consider when choosing a PU rod seal?

When selecting a PU rod seal, consider factors like size, operating conditions (temperature and pressure), fluid type, and the application environment.

12. How do I know if my PU rod seal is damaged?

Signs of a damaged PU rod seal include leaks, deformation, cracks, or excessive wear. If any of these signs are present, it’s advisable to replace the seal promptly.

13. How often should I replace my PU rod seal?

The replacement frequency depends on the application. Generally, it’s recommended to replace PU rod seals every few years. However, harsh environments may require more frequent replacement.

14. How do I maintain my PU rod seal?

To maintain a PU rod seal, keep it clean, lubricated, and inspect it regularly for signs of wear and tear.

15. What are the common problems with PU rod seals?

Common issues with PU rod seals include leaks, deformation, cracks, and excessive wear. These problems can result from various factors, including damage or improper installation.

16. How can I prevent problems with PU rod seals?

To prevent issues with PU rod seals, follow these guidelines:

  • Choose the right seal for the application.
  • Ensure proper installation.
  • Use the correct fluid.
  • Regularly inspect the seal for wear and tear.
  • Replace the seal when necessary.

17. What are the different types of materials used to make PU rod seals?

Common materials for PU rod seals include polyurethane, Viton, fluoroelastomer, and silicone, each chosen based on specific application requirements.

18. What are the different types of seals used in hydraulic applications?

Hydraulic applications may require various seals, such as O-rings, piston seals, rod seals, labyrinth seals, and diaphragm seals, depending on the specific needs of the system.

19. What are the different types of PU rod seals available?

Various types of PU rod seals include static seals, dynamic seals, pressure seals, temperature seals, chemical seals, and custom seals, which can be tailored to meet specific requirements.

20. How can I find the right PU rod seal for my application?

To find the right PU rod seal, consider factors like size, operating conditions, fluid type, and the application environment. Consulting with experts or the manufacturer can also help in the selection process.

21. What are the benefits of using a custom PU rod seal?

Custom PU rod seals offer advantages such as tailored dimensions, materials, performance, and branding to meet specific application requirements.

22. How do I get a custom PU rod seal?

To obtain a custom PU rod seal, contact a qualified seal manufacturer who can design and produce seals based on your specific needs.

23. What are the common mistakes made when installing PU rod seals?

Common installation mistakes include using the wrong size or shape of seal, inadequate cleaning, improper lubrication, and incorrect installation methods.

24. How can I avoid making mistakes when installing PU rod seals?

To avoid installation mistakes, ensure you:

  • Use the correct size and shape of seal.
  • Thoroughly clean the seal and mating surface.
  • Apply appropriate lubrication.
  • Follow the manufacturer’s installation instructions.

25. What are the common causes of PU rod seal failure?

Common causes of PU rod seal failure include improper installation, seal damage, chemical incompatibility, excessive wear, high temperatures, and high pressures.

26. How can I prevent PU rod seal failure?

Preventing PU rod seal failure involves:

  • Proper installation.
  • Protecting the seal from damage.
  • Using the correct fluid.
  • Regular inspection for wear and tear.
  • Replacing the seal as needed.

Additional information

Weight N/A
OD X ID X THICKNESS

4 MM ID X 10 MM OD X 4 MM THICKNESS, 5 MM ID X 12 MM OD X 5 MM THICKNESS, 5 MM ID X 12 MM OD X 6 MM THICKNESS, 5 MM ID X 14 MM OD X 6 MM THICKNESS, 5 MM ID X 15 MM OD X 6 MM THICKNESS, 6 MM ID X 12 MM OD X 5 MM THICKNESS, 6 MM ID X 14 MM OD X 6 MM THICKNESS, 6 MM ID X 15 MM OD X 6 MM THICKNESS, 6 MM ID X 15 MM OD X 8 MM THICKNESS, 6 MM ID X 18 MM OD X 8 MM THICKNESS, 8 MM ID X 14 MM OD X 6 MM THICKNESS, 8 MM ID X 14 MM OD X 8 MM THICKNESS, 8 MM ID X 15 MM OD X 5 MM THICKNESS, 8 MM ID X 15 MM OD X 6 MM THICKNESS, 8 MM ID X 15 MM OD X 8 MM THICKNESS, 8 MM ID X 16 MM OD X 6 MM THICKNESS, 8 MM ID X 16 MM OD X 8 MM THICKNESS, 8 MM ID X 18 MM OD X 8 MM THICKNESS, 8 MM ID X 18 MM OD X 10 MM THICKNESS, 10 MM ID X 16 MM OD X 4 MM THICKNESS, 10 MM ID X 16 MM OD X 5 MM THICKNESS, 10 MM ID X 16 MM OD X 6 MM THICKNESS, 10 MM ID X 18 MM OD X 5 MM THICKNESS, 10 MM ID X 18 MM OD X 6 MM THICKNESS, 10 MM ID X 18 MM OD X 8 MM THICKNESS, 10 MM ID X 19 MM OD X 7 MM THICKNESS, 10 MM ID X 20 MM OD X 6 MM THICKNESS, 10 MM ID X 20 MM OD X 8 MM THICKNESS, 10 MM ID X 22 MM OD X 6 MM THICKNESS, 10 MM ID X 22 MM OD X 8 MM THICKNESS, 11.2 MM ID X 19.2 MM OD X 5 MM THICKNESS, 12 MM ID X 16 MM OD X 5 MM THICKNESS, 12 MM ID X 16 MM OD X 6 MM THICKNESS, 12 MM ID X 18 MM OD X 4 MM THICKNESS, 12 MM ID X 18 MM OD X 5 MM THICKNESS, 12 MM ID X 18 MM OD X 6 MM THICKNESS, 12 MM ID X 18 MM OD X 8 MM THICKNESS, 12 MM ID X 19 MM OD X 5 MM THICKNESS, 12 MM ID X 20 MM OD X 5 MM THICKNESS, 12 MM ID X 20 MM OD X 6 MM THICKNESS, 12 MM ID X 20 MM OD X 8 MM THICKNESS, 12 MM ID X 22 MM OD X 5 MM THICKNESS, 12 MM ID X 22 MM OD X 5.5 MM THICKNESS, 12 MM ID X 22 MM OD X 7 MM THICKNESS, 12 MM ID X 22 MM OD X 8 MM THICKNESS, 12 MM ID X 24 MM OD X 6 MM THICKNESS, 12 MM ID X 24 MM OD X 8 MM THICKNESS, 12 MM ID X 25 MM OD X 8 MM THICKNESS, 12.5 MM ID X 20 MM OD X 5 MM THICKNESS, 14 MM ID X 22 MM OD X 5 MM THICKNESS, 14 MM ID X 22 MM OD X 6 MM THICKNESS, 14 MM ID X 24 MM OD X 8 MM THICKNESS, 15 MM ID X 22 MM OD X 5 MM THICKNESS, 15 MM ID X 22 MM OD X 6 MM THICKNESS, 15 MM ID X 22 MM OD X 8 MM THICKNESS, 15 MM ID X 23 MM OD X 5 MM THICKNESS, 15 MM ID X 25 MM OD X 5 MM THICKNESS, 15 MM ID X 25 MM OD X 7 MM THICKNESS, 15 MM ID X 25 MM OD X 8 MM THICKNESS, 15 MM ID X 28 MM OD X 10 MM THICKNESS, 15 MM ID X 30 MM OD X 8 MM THICKNESS, 16 MM ID X 22 MM OD X 4 MM THICKNESS, 16 MM ID X 22 MM OD X 5 MM THICKNESS, 16 MM ID X 22 MM OD X 6 MM THICKNESS, 16 MM ID X 22 MM OD X 7 MM THICKNESS, 16 MM ID X 22 MM OD X 8 MM THICKNESS, 16 MM ID X 24 MM OD X 4 MM THICKNESS, 16 MM ID X 24 MM OD X 5 MM THICKNESS, 16 MM ID X 24 MM OD X 6 MM THICKNESS, 16 MM ID X 24 MM OD X 8 MM THICKNESS, 16 MM ID X 25 MM OD X 5 MM THICKNESS, 16 MM ID X 26 MM OD X 5 MM THICKNESS, 16 MM ID X 26 MM OD X 6 MM THICKNESS, 16 MM ID X 26 MM OD X 8 MM THICKNESS, 16 MM ID X 28 MM OD X 6 MM THICKNESS, 16 MM ID X 28 MM OD X 8 MM THICKNESS, 16 MM ID X 30 MM OD X 6 MM THICKNESS, 17 MM ID X 27 MM OD X 5 MM THICKNESS, 18 MM ID X 24 MM OD X 4 MM THICKNESS, 18 MM ID X 24 MM OD X 5 MM THICKNESS, 18 MM ID X 24 MM OD X 8 MM THICKNESS, 18 MM ID X 25 MM OD X 5 MM THICKNESS, 18 MM ID X 25 MM OD X 6 MM THICKNESS, 18 MM ID X 26 MM OD X 5 MM THICKNESS, 18 MM ID X 26 MM OD X 6 MM THICKNESS, 18 MM ID X 26 MM OD X 8 MM THICKNESS, 18 MM ID X 28 MM OD X 6 MM THICKNESS, 18 MM ID X 28 MM OD X 8 MM THICKNESS, 18 MM ID X 30 MM OD X 6 MM THICKNESS, 18 MM ID X 30 MM OD X 8 MM THICKNESS, 18 MM ID X 32 MM OD X 7 MM THICKNESS, 18 MM ID X 32 MM OD X 8 MM THICKNESS, 19 MM ID X 24 MM OD X 5 MM THICKNESS, 19 MM ID X 25 MM OD X 5 MM THICKNESS, 19 MM ID X 25 MM OD X 6 MM THICKNESS, 19 MM ID X 26 MM OD X 5 MM THICKNESS, 19 MM ID X 26 MM OD X 6.7 MM THICKNESS, 19 MM ID X 32 MM OD X 8 MM THICKNESS, 20 MM ID X 26 MM OD X 3.5 MM THICKNESS, 20 MM ID X 26 MM OD X 5 MM THICKNESS, 20 MM ID X 26 MM OD X 6 MM THICKNESS, 20 MM ID X 26 MM OD X 7 MM THICKNESS, 20 MM ID X 27 MM OD X 6 MM THICKNESS, 20 MM ID X 28 MM OD X 5 MM THICKNESS, 20 MM ID X 28 MM OD X 6 MM THICKNESS, 20 MM ID X 28 MM OD X 7 MM THICKNESS, 20 MM ID X 28 MM OD X 8 MM THICKNESS, 20 MM ID X 30 MM OD X 5 MM THICKNESS, 20 MM ID X 30 MM OD X 6 MM THICKNESS, 20 MM ID X 30 MM OD X 8 MM THICKNESS, 20 MM ID X 30 MM OD X 10 MM THICKNESS, 20 MM ID X 32 MM OD X 5 MM THICKNESS, 20 MM ID X 32 MM OD X 6 MM THICKNESS, 20 MM ID X 32 MM OD X 8 MM THICKNESS, 20 MM ID X 32 MM OD X 10 MM THICKNESS, 20 MM ID X 35 MM OD X 6 MM THICKNESS, 20 MM ID X 35 MM OD X 7 MM THICKNESS, 20 MM ID X 35 MM OD X 10 MM THICKNESS, 20 MM ID X 38 MM OD X 6 MM THICKNESS, 21 MM ID X 26.5 MM OD X 6 MM THICKNESS, 22 MM ID X 28 MM OD X 5 MM THICKNESS, 22 MM ID X 28 MM OD X 6 MM THICKNESS, 22 MM ID X 28 MM OD X 8 MM THICKNESS, 22 MM ID X 30 MM OD X 5 MM THICKNESS, 22 MM ID X 30 MM OD X 5.8 MM THICKNESS, 22 MM ID X 30 MM OD X 6 MM THICKNESS, 22 MM ID X 30 MM OD X 8 MM THICKNESS, 22 MM ID X 32 MM OD X 5 MM THICKNESS, 22 MM ID X 32 MM OD X 6 MM THICKNESS, 22 MM ID X 32 MM OD X 7 MM THICKNESS, 22 MM ID X 32 MM OD X 8 MM THICKNESS, 22 MM ID X 32 MM OD X 10 MM THICKNESS, 22 MM ID X 35 MM OD X 6 MM THICKNESS, 22 MM ID X 35 MM OD X 10 MM THICKNESS, 22 MM ID X 36 MM OD X 7 MM THICKNESS, 22 MM ID X 40 MM OD X 10 MM THICKNESS, 22.4 MM ID X 30 MM OD X 5 MM THICKNESS, 22.4 MM ID X 32.4 MM OD X 8 MM THICKNESS, 23.5 MM ID X 31.5 MM OD X 5 MM THICKNESS, 24 MM ID X 40 MM OD X 8 MM THICKNESS, 25 MM ID X 32 MM OD X 6 MM THICKNESS, 25 MM ID X 32 MM OD X 7 MM THICKNESS, 25 MM ID X 32 MM OD X 8 MM THICKNESS, 25 MM ID X 33 MM OD X 5 MM THICKNESS, 25 MM ID X 33 MM OD X 5.5 MM THICKNESS, 25 MM ID X 33 MM OD X 6 MM THICKNESS, 25 MM ID X 33 MM OD X 7 MM THICKNESS, 25 MM ID X 33 MM OD X 8 MM THICKNESS, 25 MM ID X 33 MM OD X 10 MM THICKNESS, 25 MM ID X 35 MM OD X 5 MM THICKNESS, 25 MM ID X 35 MM OD X 6 MM THICKNESS, 25 MM ID X 35 MM OD X 7 MM THICKNESS, 25 MM ID X 35 MM OD X 8 MM THICKNESS, 25 MM ID X 35 MM OD X 10 MM THICKNESS, 25 MM ID X 38 MM OD X 6 MM THICKNESS, 25 MM ID X 38 MM OD X 7 MM THICKNESS, 25 MM ID X 38 MM OD X 8 MM THICKNESS, 25 MM ID X 38 MM OD X 10 MM THICKNESS, 25 MM ID X 40 MM OD X 7 MM THICKNESS, 25 MM ID X 40 MM OD X 8 MM THICKNESS, 25 MM ID X 40 MM OD X 10 MM THICKNESS, 25 MM ID X 42 MM OD X 8 MM THICKNESS, 25 MM ID X 43 MM OD X 8 MM THICKNESS, 25 MM ID X 45 MM OD X 10 MM THICKNESS, 25 MM ID X 48 MM OD X 10 MM THICKNESS, 25 MM ID X 50 MM OD X 10 MM THICKNESS, 26 MM ID X 36 MM OD X 5 MM THICKNESS, 28 MM ID X 34 MM OD X 5 MM THICKNESS, 28 MM ID X 35 MM OD X 5 MM THICKNESS, 28 MM ID X 35 MM OD X 6 MM THICKNESS, 28 MM ID X 35 MM OD X 10 MM THICKNESS, 28 MM ID X 35.5 MM OD X 5 MM THICKNESS, 28 MM ID X 36 MM OD X 5 MM THICKNESS, 28 MM ID X 36 MM OD X 6 MM THICKNESS, 28 MM ID X 36 MM OD X 7 MM THICKNESS, 28 MM ID X 36 MM OD X 7.5 MM THICKNESS, 28 MM ID X 36 MM OD X 8 MM THICKNESS, 28 MM ID X 38 MM OD X 7 MM THICKNESS, 28 MM ID X 38 MM OD X 7.3 MM THICKNESS UNS, 28 MM ID X 38 MM OD X 8 MM THICKNESS, 28 MM ID X 38 MM OD X 10 MM THICKNESS, 28 MM ID X 40 MM OD X 6 MM THICKNESS, 28 MM ID X 40 MM OD X 8 MM THICKNESS, 28 MM ID X 40 MM OD X 10 MM THICKNESS, 28 MM ID X 43 MM OD X 10 MM THICKNESS, 30 MM ID X 38 MM OD X 5 MM THICKNESS, 30 MM ID X 38 MM OD X 6 MM THICKNESS, 30 MM ID X 38 MM OD X 7 MM THICKNESS, 30 MM ID X 38 MM OD X 8 MM THICKNESS, 30 MM ID X 40 MM OD X 5 MM THICKNESS, 30 MM ID X 40 MM OD X 6 MM THICKNESS, 30 MM ID X 40 MM OD X 7 MM THICKNESS, 30 MM ID X 40 MM OD X 8 MM THICKNESS, 30 MM ID X 40 MM OD X 10 MM THICKNESS, 30 MM ID X 42 MM OD X 6 MM THICKNESS, 30 MM ID X 42 MM OD X 7 MM THICKNESS, 30 MM ID X 42 MM OD X 8 MM THICKNESS, 30 MM ID X 42 MM OD X 10.2 MM THICKNESS, 30 MM ID X 43 MM OD X 6.5 MM THICKNESS, 30 MM ID X 43 MM OD X 7 MM THICKNESS, 30 MM ID X 43 MM OD X 10 MM THICKNESS, 30 MM ID X 45 MM OD X 7 MM THICKNESS, 30 MM ID X 45 MM OD X 10 MM THICKNESS, 30 MM ID X 50 MM OD X 10 MM THICKNESS, 30 MM ID X 50 MM OD X 12 MM THICKNESS, 30 MM ID X 52 MM OD X 10 MM THICKNESS, 31.5 MM ID X 41.5 MM OD X 6 MM THICKNESS, 32 MM ID X 40 MM OD X 4 MM THICKNESS, 32 MM ID X 40 MM OD X 6 MM THICKNESS, 32 MM ID X 40 MM OD X 7 MM THICKNESS, 32 MM ID X 40 MM OD X 8 MM THICKNESS, 32 MM ID X 40 MM OD X 10 MM THICKNESS, 32 MM ID X 42 MM OD X 6 MM THICKNESS, 32 MM ID X 42 MM OD X 7 MM THICKNESS, 32 MM ID X 42 MM OD X 8 MM THICKNESS, 32 MM ID X 42 MM OD X 10 MM THICKNESS, 32 MM ID X 45 MM OD X 6 MM THICKNESS, 32 MM ID X 45 MM OD X 8 MM THICKNESS, 32 MM ID X 45 MM OD X 10 MM THICKNESS, 32 MM ID X 47 MM OD X 8 MM THICKNESS, 32 MM ID X 48 MM OD X 8 MM THICKNESS, 32 MM ID X 48 MM OD X 10 MM THICKNESS, 32 MM ID X 50 MM OD X 12 MM THICKNESS, 35 MM ID X 42 MM OD X 6 MM THICKNESS, 35 MM ID X 42 MM OD X 7 MM THICKNESS, 35 MM ID X 42 MM OD X 8 MM THICKNESS, 35 MM ID X 43 MM OD X 5 MM THICKNESS, 35 MM ID X 43 MM OD X 6 MM THICKNESS, 35 MM ID X 43 MM OD X 6.3 MM THICKNESS, 35 MM ID X 43 MM OD X 7 MM THICKNESS, 35 MM ID X 43 MM OD X 8 MM THICKNESS, 35 MM ID X 43 MM OD X 10 MM THICKNESS, 35 MM ID X 45 MM OD X 5 MM THICKNESS, 35 MM ID X 45 MM OD X 6 MM THICKNESS, 35 MM ID X 45 MM OD X 7 MM THICKNESS, 35 MM ID X 45 MM OD X 8 MM THICKNESS, 35 MM ID X 45 MM OD X 10 MM THICKNESS, 35 MM ID X 48 MM OD X 8 MM THICKNESS, 35 MM ID X 48 MM OD X 10 MM THICKNESS, 35 MM ID X 50 MM OD X 9 MM THICKNESS, 35 MM ID X 50 MM OD X 10 MM THICKNESS, 35 MM ID X 50 MM OD X 11.5 MM THICKNESS, 35 MM ID X 50 MM OD X 12 MM THICKNESS, 35 MM ID X 51 MM OD X 10 MM THICKNESS, 35 MM ID X 55 MM OD X 10.2 MM THICKNESS, 35 MM ID X 58 MM OD X 10 MM THICKNESS, 35.5 MM ID X 45 MM OD X 6 MM THICKNESS, 36 MM ID X 46 MM OD X 9 MM THICKNESS, 36 MM ID X 50 MM OD X 8 MM THICKNESS, 37 MM ID X 47 MM OD X 7 MM THICKNESS, 38 MM ID X 44 MM OD X 5 MM THICKNESS, 38 MM ID X 44 MM OD X 5.3 MM THICKNESS, 38 MM ID X 45 MM OD X 7 MM THICKNESS, 38 MM ID X 45 MM OD X 8 MM THICKNESS, 38 MM ID X 46 MM OD X 6 MM THICKNESS, 38 MM ID X 48 MM OD X 6 MM THICKNESS, 38 MM ID X 48 MM OD X 8 MM THICKNESS, 38 MM ID X 48 MM OD X 10 MM THICKNESS, 38 MM ID X 50 MM OD X 9 MM THICKNESS, 38 MM ID X 50 MM OD X 10 MM THICKNESS, 38 MM ID X 52 MM OD X 10 MM THICKNESS, 38 MM ID X 55 MM OD X 10 MM THICKNESS, 38 MM ID X 58 MM OD X 10 MM THICKNESS, 40 MM ID X 48 MM OD X 6 MM THICKNESS, 40 MM ID X 48 MM OD X 8 MM THICKNESS, 40 MM ID X 50 MM OD X 6 MM THICKNESS, 40 MM ID X 50 MM OD X 6.5 MM THICKNESS, 40 MM ID X 50 MM OD X 7 MM THICKNESS, 40 MM ID X 50 MM OD X 7.3 MM THICKNESS UNS, 40 MM ID X 50 MM OD X 8 MM THICKNESS, 40 MM ID X 50 MM OD X 9 MM THICKNESS, 40 MM ID X 50 MM OD X 10 MM THICKNESS, 40 MM ID X 52 MM OD X 8 MM THICKNESS, 40 MM ID X 52 MM OD X 10 MM THICKNESS, 40 MM ID X 55 MM OD X 6.5 MM THICKNESS, 40 MM ID X 55 MM OD X 7 MM THICKNESS, 40 MM ID X 55 MM OD X 8 MM THICKNESS, 40 MM ID X 55 MM OD X 9 MM THICKNESS, 40 MM ID X 55 MM OD X 10 MM THICKNESS, 40 MM ID X 56 MM OD X 10 MM THICKNESS, 40 MM ID X 60 MM OD X 10 MM THICKNESS, 40 MM ID X 60 MM OD X 12 MM THICKNESS, 40 MM ID X 65 MM OD X 10 MM THICKNESS, 40 MM ID X 65 MM OD X 12 MM THICKNESS, 42 MM ID X 50 MM OD X 6 MM THICKNESS, 42 MM ID X 52 MM OD X 8 MM THICKNESS, 42 MM ID X 52 MM OD X 10 MM THICKNESS, 43 MM ID X 63 MM OD X 10 MM THICKNESS, 45 MM ID X 53 MM OD X 6 MM THICKNESS, 45 MM ID X 53 MM OD X 8 MM THICKNESS, 45 MM ID X 55 MM OD X 5 MM THICKNESS, 45 MM ID X 55 MM OD X 6 MM THICKNESS, 45 MM ID X 55 MM OD X 6.5 MM THICKNESS, 45 MM ID X 55 MM OD X 7 MM THICKNESS, 45 MM ID X 55 MM OD X 7.3 MM THICKNESS UNS, 45 MM ID X 55 MM OD X 8 MM THICKNESS, 45 MM ID X 55 MM OD X 10 MM THICKNESS, 45 MM ID X 56 MM OD X 7 MM THICKNESS, 45 MM ID X 60 MM OD X 9 MM THICKNESS, 45 MM ID X 60 MM OD X 10.2 MM THICKNESS, 45 MM ID X 60 MM OD X 11.4 MM THICKNESS, 45 MM ID X 60 MM OD X 12.5 MM THICKNESS, 45 MM ID X 62 MM OD X 13 MM THICKNESS, 45 MM ID X 63 MM OD X 10 MM THICKNESS, 45 MM ID X 63 MM OD X 12 MM THICKNESS, 45 MM ID X 65 MM OD X 6 MM THICKNESS, 45 MM ID X 65 MM OD X 10 MM THICKNESS, 45 MM ID X 65 MM OD X 12 MM THICKNESS, 45 MM ID X 70 MM OD X 10 MM THICKNESS, 45 MM ID X 70 MM OD X 16 MM THICKNESS, 47 MM ID X 57 MM OD X 6 MM THICKNESS, 47 MM ID X 57 MM OD X 9 MM THICKNESS, 48 MM ID X 58 MM OD X 6 MM THK (UHS), 48 MM ID X 58 MM OD X 6 MM THK (UNS), 48 MM ID X 58 MM OD X 7 MM THICKNESS, 48 MM ID X 60 MM OD X 8 MM THICKNESS, 48 MM ID X 60 MM OD X 10 MM THICKNESS, 48 MM ID X 63 MM OD X 11.5 MM THICKNESS, 50 MM ID X 58 MM OD X 7 MM THICKNESS, 50 MM ID X 58 MM OD X 8 MM THICKNESS, 50 MM ID X 60 MM OD X 6 MM THICKNESS, 50 MM ID X 60 MM OD X 7 MM THICKNESS, 50 MM ID X 60 MM OD X 8 MM THICKNESS, 50 MM ID X 60 MM OD X 10 MM THICKNESS, 50 MM ID X 60 MM OD X 11 MM THICKNESS, 50 MM ID X 60 MM OD X 12 MM THICKNESS, 50 MM ID X 62 MM OD X 6 MM THICKNESS, 50 MM ID X 62 MM OD X 10 MM THICKNESS, 50 MM ID X 63 MM OD X 6 MM THICKNESS, 50 MM ID X 63 MM OD X 6.5 MM THICKNESS, 50 MM ID X 63 MM OD X 7 MM THICKNESS, 50 MM ID X 63 MM OD X 8 MM THICKNESS, 50 MM ID X 63 MM OD X 10 MM THICKNESS, 50 MM ID X 63 MM OD X 15 MM THICKNESS, 50 MM ID X 65 MM OD X 8 MM THICKNESS, 50 MM ID X 65 MM OD X 9 MM THICKNESS, 50 MM ID X 65 MM OD X 10 MM THICKNESS, 50 MM ID X 65 MM OD X 10.2 MM THICKNESS, 50 MM ID X 65 MM OD X 12 MM THICKNESS, 50 MM ID X 68 MM OD X 10 MM THICKNESS, 50 MM ID X 70 MM OD X 10 MM THICKNESS, 50 MM ID X 70 MM OD X 12 MM THICKNESS, 50 MM ID X 75 MM OD X 10 MM THICKNESS, 50 MM ID X 80 MM OD X 12 MM THICKNESS, 50.8 MM ID X 63.5 MM OD X 9.5 MM THICKNESS, 52 MM ID X 62 MM OD X 12 MM THICKNESS, 53 MM ID X 63 MM OD X 6 MM THICKNESS, 53 MM ID X 63 MM OD X 6.5 MM THICKNESS, 53 MM ID X 63 MM OD X 8 MM THICKNESS, 53 MM ID X 63 MM OD X 10 MM THICKNESS, 55 MM ID X 63 MM OD X 8 MM THICKNESS, 55 MM ID X 65 MM OD X 5 MM THICKNESS, 55 MM ID X 65 MM OD X 6 MM THICKNESS, 55 MM ID X 65 MM OD X 6.5 MM THICKNESS, 55 MM ID X 65 MM OD X 8 MM THICKNESS, 55 MM ID X 65 MM OD X 10 MM THICKNESS, 55 MM ID X 65 MM OD X 12 MM THICKNESS, 55 MM ID X 68 MM OD X 10 MM THICKNESS, 55 MM ID X 70 MM OD X 9 MM THICKNESS, 55 MM ID X 70 MM OD X 10 MM THICKNESS, 55 MM ID X 70 MM OD X 12 MM THICKNESS, 55 MM ID X 75 MM OD X 10 MM THICKNESS, 55 MM ID X 75 MM OD X 12 MM THICKNESS, 55 MM ID X 78 MM OD X 7 MM THICKNESS, 55 MM ID X 78 MM OD X 10 MM THICKNESS, 55 MM ID X 80 MM OD X 10 MM THICKNESS, 55 MM ID X 80 MM OD X 12 MM THICKNESS, 56 MM ID X 66 MM OD X 6 MM THICKNESS, 56 MM ID X 76 MM OD X 12 MM THICKNESS, 57 MM ID X 65 MM OD X 5 MM THICKNESS, 57 MM ID X 77 MM OD X 10 MM THICKNESS, 58 MM ID X 68 MM OD X 6 MM THICKNESS, 60 MM ID X 68 MM OD X 6 MM THICKNESS, 60 MM ID X 70 MM OD X 6 MM THICKNESS, 60 MM ID X 70 MM OD X 7 MM THICKNESS, 60 MM ID X 70 MM OD X 8 MM THICKNESS, 60 MM ID X 70 MM OD X 10 MM THICKNESS, 60 MM ID X 70 MM OD X 12 MM THICKNESS, 60 MM ID X 71 MM OD X 7 MM THICKNESS, 60 MM ID X 72 MM OD X 10 MM THICKNESS, 60 MM ID X 73 MM OD X 12 MM THICKNESS, 60 MM ID X 75 MM OD X 9 MM THICKNESS, 60 MM ID X 75 MM OD X 10 MM THICKNESS UNS, 60 MM ID X 75 MM OD X 12 MM THICKNESS, 60 MM ID X 75 MM OD X 15 MM THICKNESS, 60 MM ID X 76 MM OD X 12 MM THICKNESS, 60 MM ID X 80 MM OD X 10 MM THICKNESS, 60 MM ID X 80 MM OD X 12 MM THICKNESS, 60 MM ID X 85 MM OD X 12 MM THICKNESS, 60 MM ID X 90 MM OD X 15 MM THICKNESS, 61 MM ID X 71 MM OD X 6 MM THICKNESS, 62 MM ID X 82 MM OD X 12 MM THICKNESS, 63 MM ID X 73 MM OD X 6 MM THICKNESS, 63 MM ID X 73 MM OD X 8 MM THICKNESS, 63 MM ID X 73 MM OD X 10 MM THICKNESS, 63 MM ID X 73 MM OD X 12 MM THICKNESS, 63 MM ID X 75 MM OD X 10 MM THICKNESS, 63 MM ID X 78 MM OD X 10 MM THICKNESS, 63 MM ID X 78 MM OD X 12 MM THICKNESS, 63 MM ID X 83 MM OD X 12 MM THICKNESS, 65 MM ID X 75 MM OD X 6 MM THICKNESS, 65 MM ID X 75 MM OD X 8 MM THICKNESS, 65 MM ID X 75 MM OD X 10 MM THICKNESS, 65 MM ID X 75 MM OD X 12 MM THICKNESS, 65 MM ID X 78 MM OD X 10 MM THICKNESS, 65 MM ID X 78 MM OD X 12 MM THICKNESS, 65 MM ID X 78 MM OD X 12.5 MM THICKNESS, 65 MM ID X 80 MM OD X 8 MM THICKNESS, 65 MM ID X 80 MM OD X 9 MM THICKNESS, 65 MM ID X 80 MM OD X 10 MM THICKNESS, 65 MM ID X 80 MM OD X 11 MM THICKNESS, 65 MM ID X 80 MM OD X 12 MM THICKNESS, 65 MM ID X 85 MM OD X 10 MM THICKNESS, 65 MM ID X 85 MM OD X 12 MM THICKNESS, 65 MM ID X 90 MM OD X 12 MM THICKNESS, 65 MM ID X 90 MM OD X 15 MM THICKNESS, 66 MM ID X 76 MM OD X 6 MM THICKNESS, 67 MM ID X 77 MM OD X 6 MM THICKNESS, 70 MM ID X 78 MM OD X 8 MM THICKNESS, 70 MM ID X 80 MM OD X 6 MM THICKNESS, 70 MM ID X 80 MM OD X 6.5 MM THICKNESS, 70 MM ID X 80 MM OD X 8 MM THICKNESS, 70 MM ID X 80 MM OD X 9 MM THICKNESS, 70 MM ID X 80 MM OD X 10 MM THICKNESS, 70 MM ID X 80 MM OD X 12 MM THICKNESS, 70 MM ID X 83 MM OD X 10 MM THICKNESS, 70 MM ID X 85 MM OD X 9 MM THICKNESS, 70 MM ID X 85 MM OD X 10 MM THICKNESS, 70 MM ID X 85 MM OD X 12 MM THICKNESS, 70 MM ID X 90 MM OD X 10 MM THICKNESS, 70 MM ID X 90 MM OD X 12 MM THICKNESS, 70 MM ID X 95 MM OD X 12 MM THICKNESS, 71 MM ID X 80 MM OD X 6 MM THICKNESS, 72 MM ID X 85 MM OD X 10 MM THICKNESS, 75 MM ID X 85 MM OD X 6 MM THICKNESS, 75 MM ID X 85 MM OD X 10 MM THICKNESS, 75 MM ID X 85 MM OD X 12 MM THICKNESS, 75 MM ID X 90 MM OD X 10 MM THICKNESS, 75 MM ID X 90 MM OD X 12 MM THICKNESS, 75 MM ID X 95 MM OD X 10 MM THICKNESS, 75 MM ID X 95 MM OD X 12 MM THICKNESS, 75 MM ID X 100 MM OD X 12 MM THICKNESS, 76 MM ID X 86 MM OD X 6 MM THICKNESS, 76 MM ID X 88 MM OD X 9.5 MM THICKNESS, 76 MM ID X 95 MM OD X 9.52 MM THICKNESS, 80 MM ID X 90 MM OD X 6 MM THICKNESS, 80 MM ID X 90 MM OD X 6.5 MM THICKNESS, 80 MM ID X 90 MM OD X 7 MM THICKNESS, 80 MM ID X 90 MM OD X 8 MM THICKNESS, 80 MM ID X 90 MM OD X 10 MM THICKNESS, 80 MM ID X 90 MM OD X 12 MM THICKNESS, 80 MM ID X 93 MM OD X 10 MM THICKNESS, 80 MM ID X 93 MM OD X 12 MM THICKNESS, 80 MM ID X 95 MM OD X 9 MM THICKNESS, 80 MM ID X 95 MM OD X 10 MM THICKNESS, 80 MM ID X 95 MM OD X 11.4 MM THICKNESS UNS, 80 MM ID X 95 MM OD X 12 MM THICKNESS, 80 MM ID X 100 MM OD X 10 MM THICKNESS, 80 MM ID X 100 MM OD X 12 MM THICKNESS, 80 MM ID X 100 MM OD X 15 MM THICKNESS, 80 MM ID X 105 MM OD X 10 MM THICKNESS, 80 MM ID X 105 MM OD X 12 MM THICKNESS, 80 MM ID X 110 MM OD X 15 MM THICKNESS, 83.5 MM ID X 93.5 MM OD X 6 MM THICKNESS, 85 MM ID X 95 MM OD X 6 MM THICKNESS, 85 MM ID X 95 MM OD X 7 MM THICKNESS, 85 MM ID X 95 MM OD X 10 MM THICKNESS, 85 MM ID X 95 MM OD X 12 MM THICKNESS, 85 MM ID X 100 MM OD X 9 MM THICKNESS, 85 MM ID X 100 MM OD X 10 MM THICKNESS, 85 MM ID X 100 MM OD X 12 MM THICKNESS, 85 MM ID X 100 MM OD X 15 MM THICKNESS, 85 MM ID X 105 MM OD X 10 MM THICKNESS, 85 MM ID X 105 MM OD X 12 MM THICKNESS, 85 MM ID X 105 MM OD X 16 MM THICKNESS, 85 MM ID X 110 MM OD X 12 MM THICKNESS, 86 MM ID X 96 MM OD X 6 MM THICKNESS, 88 MM ID X 98 MM OD X 6 MM THICKNESS, 88 MM ID X 100 MM OD X 12 MM THICKNESS, 88 MM ID X 100 MM OD X 14 MM THICKNESS, 90 MM ID X 100 MM OD X 8 MM THICKNESS, 90 MM ID X 100 MM OD X 10 MM THICKNESS, 90 MM ID X 100 MM OD X 12 MM THICKNESS, 90 MM ID X 105 MM OD X 9 MM THICKNESS, 90 MM ID X 105 MM OD X 10 MM THICKNESS, 90 MM ID X 105 MM OD X 12 MM THICKNESS, 90 MM ID X 110 MM OD X 9 MM THICKNESS, 90 MM ID X 110 MM OD X 12 MM THICKNESS, 90 MM ID X 110 MM OD X 13 MM THICKNESS, 90 MM ID X 110 MM OD X 15 MM THICKNESS, 90 MM ID X 115 MM OD X 9 MM THICKNESS, 90 MM ID X 115 MM OD X 12 MM THICKNESS, 90 MM ID X 115 MM OD X 15 MM THICKNESS, 90 MM ID X 120 MM OD X 12 MM THICKNESS, 95 MM ID X 110 MM OD X 9 MM THICKNESS, 95 MM ID X 110 MM OD X 12 MM THICKNESS, 95 MM ID X 115 MM OD X 9 MM THICKNESS, 95 MM ID X 115 MM OD X 12 MM THICKNESS, 95 MM ID X 115 MM OD X 15 MM THICKNESS, 95 MM ID X 125 MM OD X 15 MM THICKNESS, 98 MM ID X 112 MM OD X 9 MM THICKNESS, 100 MM ID X 110 MM OD X 10 MM THICKNESS, 100 MM ID X 112 MM OD X 9 MM THICKNESS, 100 MM ID X 115 MM OD X 9 MM THICKNESS, 100 MM ID X 115 MM OD X 10 MM THICKNESS, 100 MM ID X 115 MM OD X 12 MM THICKNESS, 100 MM ID X 115 MM OD X 15 MM THICKNESS, 100 MM ID X 120 MM OD X 10 MM THICKNESS, 100 MM ID X 120 MM OD X 12 MM THICKNESS, 100 MM ID X 120 MM OD X 15 MM THICKNESS, 100 MM ID X 125 MM OD X 9 MM THICKNESS, 100 MM ID X 125 MM OD X 12 MM THICKNESS, 100 MM ID X 125 MM OD X 15 MM THICKNESS, 100 MM ID X 130 MM OD X 12 MM THICKNESS, 105 MM ID X 120 MM OD X 9 MM THICKNESS, 105 MM ID X 120 MM OD X 10 MM THICKNESS, 105 MM ID X 120 MM OD X 12 MM THICKNESS, 105 MM ID X 120 MM OD X 15 MM THICKNESS, 105 MM ID X 125 MM OD X 12 MM THICKNESS, 105 MM ID X 125 MM OD X 15 MM THICKNESS, 106 MM ID X 120 MM OD X 8.5 MM THICKNESS, 110 MM ID X 125 MM OD X 9 MM THICKNESS, 110 MM ID X 125 MM OD X 12 MM THICKNESS, 110 MM ID X 125 MM OD X 15 MM THICKNESS, 110 MM ID X 130 MM OD X 12 MM THICKNESS, 110 MM ID X 130 MM OD X 15 MM THICKNESS, 110 MM ID X 135 MM OD X 18 MM THICKNESS, 112 MM ID X 125 MM OD X 9 MM THICKNESS, 115 MM ID X 125 MM OD X 12 MM THICKNESS, 115 MM ID X 125 MM OD X 15 MM THICKNESS, 115 MM ID X 130 MM OD X 9 MM THICKNESS, 115 MM ID X 130 MM OD X 12 MM THICKNESS, 115 MM ID X 135 MM OD X 12 MM THICKNESS, 115 MM ID X 135 MM OD X 15 MM THICKNESS, 115 MM ID X 140 MM OD X 15 MM THICKNESS, 120 MM ID X 135 MM OD X 9 MM THICKNESS, 120 MM ID X 135 MM OD X 12 MM THICKNESS, 120 MM ID X 135 MM OD X 15 MM THICKNESS, 120 MM ID X 140 MM OD X 10 MM THICKNESS, 120 MM ID X 140 MM OD X 12 MM THICKNESS, 120 MM ID X 140 MM OD X 15 MM THICKNESS, 120 MM ID X 145 MM OD X 18 MM THICKNESS, 120 MM ID X 150 MM OD X 15 MM THICKNESS, 120 MM ID X 160 MM OD X 15 MM THICKNESS, 122 MM ID X 135 MM OD X 9 MM THICKNESS, 125 MM ID X 140 MM OD X 9 MM THICKNESS, 125 MM ID X 140 MM OD X 11 MM THICKNESS, 125 MM ID X 140 MM OD X 12 MM THICKNESS, 125 MM ID X 140 MM OD X 15 MM THICKNESS, 125 MM ID X 145 MM OD X 12 MM THICKNESS, 125 MM ID X 145 MM OD X 15 MM THICKNESS, 125 MM ID X 150 MM OD X 15 MM THICKNESS, 130 MM ID X 145 MM OD X 9 MM THICKNESS, 130 MM ID X 145 MM OD X 15 MM THICKNESS, 130 MM ID X 150 MM OD X 12 MM THICKNESS, 130 MM ID X 150 MM OD X 15 MM THICKNESS, 135 MM ID X 150 MM OD X 9 MM THICKNESS, 135 MM ID X 150 MM OD X 12 MM THICKNESS, 135 MM ID X 150 MM OD X 15 MM THICKNESS, 135 MM ID X 160 MM OD X 18 MM THICKNESS, 135 MM ID X 165 MM OD X 15 MM THICKNESS, 136 MM ID X 150 MM OD X 9 MM THICKNESS, 140 MM ID X 150 MM OD X 13 MM THICKNESS, 140 MM ID X 155 MM OD X 9 MM THICKNESS, 140 MM ID X 155 MM OD X 12 MM THICKNESS, 140 MM ID X 155 MM OD X 15 MM THICKNESS, 140 MM ID X 160 MM OD X 10 MM THICKNESS, 140 MM ID X 160 MM OD X 12 MM THICKNESS, 140 MM ID X 160 MM OD X 15 MM THICKNESS, 140 MM ID X 160 MM OD X 18 MM THICKNESS, 145 MM ID X 160 MM OD X 9 MM THICKNESS, 145 MM ID X 160 MM OD X 15 MM THICKNESS, 145 MM ID X 165 MM OD X 15 MM THICKNESS, 150 MM ID X 165 MM OD X 9 MM THICKNESS, 150 MM ID X 170 MM OD X 12 MM THICKNESS, 150 MM ID X 170 MM OD X 15 MM THICKNESS, 150 MM ID X 175 MM OD X 15 MM THICKNESS, 150 MM ID X 180 MM OD X 15 MM THICKNESS, 150 MM ID X 180 MM OD X 18 MM THICKNESS, 155 MM ID X 175 MM OD X 15 MM THICKNESS, 155 MM ID X 180 MM OD X 15 MM THICKNESS, 160 MM ID X 175 MM OD X 9 MM THICKNESS, 160 MM ID X 175 MM OD X 16 MM THICKNESS, 160 MM ID X 180 MM OD X 12 MM THICKNESS, 160 MM ID X 180 MM OD X 15 MM THICKNESS, 160 MM ID X 185 MM OD X 12 MM THICKNESS, 160 MM ID X 185 MM OD X 15 MM THICKNESS, 160 MM ID X 185 MM OD X 16 MM THICKNESS, 160 MM ID X 190 MM OD X 18.5 MM THICKNESS, 165 MM ID X 180 MM OD X 9 MM THICKNESS, 165 MM ID X 180 MM OD X 15 MM THICKNESS, 165 MM ID X 185 MM OD X 15 MM THICKNESS, 165 MM ID X 190 MM OD X 15 MM THICKNESS, 170 MM ID X 185 MM OD X 12 MM THICKNESS, 170 MM ID X 190 MM OD X 12 MM THICKNESS, 170 MM ID X 190 MM OD X 15 MM THICKNESS, 170 MM ID X 195 MM OD X 15 MM THICKNESS, 170 MM ID X 195 MM OD X 16 MM THICKNESS, 170 MM ID X 200 MM OD X 15 MM THICKNESS, 170 MM ID X 200 MM OD X 18 MM THICKNESS, 175 MM ID X 195 MM OD X 14 MM THICKNESS, 175 MM ID X 200 MM OD X 15 MM THICKNESS, 175 MM ID X 200 MM OD X 18 MM THICKNESS, 180 MM ID X 200 MM OD X 12 MM THICKNESS, 180 MM ID X 200 MM OD X 12.5 MM THICKNESS, 180 MM ID X 200 MM OD X 15 MM THICKNESS, 180 MM ID X 205 MM OD X 15 MM THICKNESS, 180 MM ID X 205 MM OD X 16 MM THICKNESS, 180 MM ID X 210 MM OD X 15 MM THICKNESS, 190 MM ID X 210 MM OD X 12 MM THICKNESS, 190 MM ID X 210 MM OD X 15 MM THICKNESS, 190 MM ID X 215 MM OD X 15 MM THICKNESS, 190 MM ID X 215 MM OD X 16 MM THICKNESS UNR, 190 MM ID X 215 MM OD X 16 MM THICKNESS UNS, 190 MM ID X 220 MM OD X 15 MM THICKNESS, 190 MM ID X 220 MM OD X 25 MM THICKNESS, 195 MM ID X 215 MM OD X 12 MM THICKNESS, 200 MM ID X 220 MM OD X 12 MM THICKNESS, 200 MM ID X 220 MM OD X 15 MM THICKNESS, 200 MM ID X 225 MM OD X 15 MM THICKNESS, 200 MM ID X 225 MM OD X 16 MM THICKNESS, 200 MM ID X 230 MM OD X 18.7 MM THICKNESS, 204 MM ID X 224 MM OD X 12 MM THICKNESS, 210 MM ID X 230 MM OD X 13 MM THICKNESS, 210 MM ID X 230 MM OD X 16 MM THICKNESS, 210 MM ID X 235 MM OD X 18 MM THICKNESS, 210 MM ID X 235 MM OD X 19 MM THICKNESS, 212 MM ID X 237 MM OD X 19 MM THICKNESS, 220 MM ID X 240 MM OD X 12 MM THICKNESS, 220 MM ID X 240 MM OD X 16 MM THICKNESS, 220 MM ID X 245 MM OD X 18 MM THICKNESS, 220 MM ID X 250 MM OD X 15 MM THICKNESS, 224 MM ID X 249 MM OD X 19 MM THICKNESS, 225 MM ID X 250 MM OD X 12 MM THICKNESS, 230 MM ID X 250 MM OD X 12 MM THICKNESS, 230 MM ID X 250 MM OD X 15 MM THICKNESS, 230 MM ID X 255 MM OD X 19 MM THICKNESS, 230 MM ID X 260 MM OD X 18 MM THICKNESS, 235 MM ID X 260 MM OD X 16 MM THICKNESS, 236 MM ID X 261 MM OD X 19 MM THICKNESS, 240 MM ID X 260 MM OD X 12 MM THICKNESS, 240 MM ID X 265 MM OD X 18 MM THICKNESS, 250 MM ID X 270 MM OD X 12 MM THICKNESS, 250 MM ID X 275 MM OD X 19 MM THICKNESS, 250 MM ID X 280 MM OD X 18 MM THICKNESS, 260 MM ID X 280 MM OD X 18 MM THICKNESS, 260 MM ID X 290 MM OD X 18 MM THICKNESS, 265 MM ID X 295 MM OD X 19 MM THICKNESS, 270 MM ID X 300 MM OD X 19 MM THICKNESS, 275 MM ID X 310 MM OD X 15 MM THICKNESS, 280 MM ID X 300 MM OD X 15 MM THICKNESS, 280 MM ID X 305 MM OD X 20 MM THICKNESS, 280 MM ID X 310 MM OD X 19 MM THICKNESS, 290 MM ID X 320 MM OD X 18 MM THICKNESS, 290 MM ID X 320 MM OD X 20 MM THICKNESS, 300 MM ID X 330 MM OD X 18 MM THICKNESS, 300 MM ID X 332 MM OD X 24 MM THICKNESS, 300 MM ID X 340 MM OD X 20 MM THICKNESS, 304 MM ID X 340 MM OD X 27 MM THICKNESS, 305 MM ID X 320 MM OD X 18 MM THICKNESS, 310 MM ID X 340 MM OD X 22 MM THICKNESS, 320 MM ID X 350 MM OD X 20 MM THICKNESS, 330 MM ID X 360 MM OD X 20 MM THICKNESS, 330 MM ID X 360 MM OD X 22 MM THICKNESS, 340 MM ID X 370 MM OD X 22 MM THICKNESS, 345 MM ID X 365 MM OD X 14 MM THICKNESS, 350 MM ID X 380 MM OD X 22 MM THICKNESS, 355 MM ID X 385 MM OD X 22 MM THICKNESS, 360 MM ID X 390 MM OD X 22 MM THICKNESS, 370 MM ID X 400 MM OD X 22 MM THICKNESS, 380 MM ID X 410 MM OD X 22 MM THICKNESS, 400 MM ID X 430 MM OD X 19 MM THICKNESS, 400 MM ID X 430 MM OD X 22 MM THICKNESS, 420 MM ID X 450 MM OD X 19 MM THICKNESS, 420 MM ID X 450 MM OD X 22 MM THICKNESS, 125 MM ID X 137 MM OD X 14 MM THICKNESS, 160 MM ID X 172 MM OD X 14 MM THICKNESS, 200 MM ID X 216 MM OD X 18 MM THICKNESS, 20 MM ID X 30 MM OD X 7.3 MM THICKNESS, 22 MM ID X 32 MM OD X 7.3 MM THICKNESS, 25 MM ID X 33 MM OD X 5.7 MM THICKNESS, 25 MM ID X 35 MM OD X 7.3 MM THICKNESS, 28 MM ID X 38 MM OD X 7.3 MM THICKNESS, 30 MM ID X 40 MM OD X 7.3 MM THICKNESS, 32 MM ID X 42 MM OD X 7.3 MM THICKNESS, 35 MM ID X 45 MM OD X 7.3 MM THICKNESS, 36 MM ID X 46 MM OD X 7.3 MM THICKNESS, 38 MM ID X 48 MM OD X 7.3 MM THICKNESS, 40 MM ID X 50 MM OD X 7.3 MM THICKNESS, 45 MM ID X 55 MM OD X 7.3 MM THICKNESS, 50 MM ID X 60 MM OD X 7.3 MM THICKNESS, 50 MM ID X 65 MM OD X 11.5 MM THICKNESS, 55 MM ID X 65 MM OD X 7.3 MM THICKNESS, 55 MM ID X 70 MM OD X 11.4 MM THICKNESS, 56 MM ID X 66 MM OD X 7.3 MM THICKNESS, 56 MM ID X 71 MM OD X 11.4 MM THICKNESS, 60 MM ID X 70 MM OD X 7.3 MM THICKNESS, 60 MM ID X 70 MM OD X 11.4 MM THICKNESS, 60 MM ID X 75 MM OD X 10 MM THICKNESS, 60 MM ID X 75 MM OD X 11.8 MM THICKNESS, 63 MM ID X 78 MM OD X 11.4 MM THICKNESS, 65 MM ID X 80 MM OD X 11.8 MM THICKNESS, 70 MM ID X 85 MM OD X 11.4 MM THICKNESS, 80 MM ID X 90 MM OD X 11.8 MM THICKNESS, 80 MM ID X 95 MM OD X 11.4 MM THICKNESS, 90 MM ID X 105 MM OD X 11.4 MM THICKNESS

3 reviews for PU V SEAL | PU HYDRAULIC SEAL | PU PISTON SEAL | PU ROD SEAL | CYLINDER SEAL | POLYURETHANE SEAL | PU V SEAL | PU U SEAL

  1. Jules Cappello –

    Insightful piece

  2. 34.01hv6y2p5xfqvjrh2j20e8dw44@mail5u.run –

    consequatur velit fuga rerum quasi doloremque mollitia nam esse dicta ex dignissimos porro occaecati qui fugit iste ipsam optio ab non. molestiae molestias et laudantium assumenda nulla corrupti ullam

  3. Więcej informacji –

    Insightful piece

Add a review

Your email address will not be published. Required fields are marked *

Post comment

Related products